Another quick post so that I remember how to complete the AudioCodes vSBC initial configuration..
After the import of the OVF file the system will boot with a default IP address of 192.168.0.1.
To run the Configuration Wizard complete the following:
Login using the default username and password:
Enter the privileged command level:
Password is default: Admin
select "Yes" to complete
Select "No" for the "Do you want to configure Web-CLI User parameters?
Select "Yes" to "Do you want to configure OAMP Network Settings?"
Enter VLAN ID:
Enter IP Address:
Enter prefix length:
Enter default gateway:
Enter primary DNS server:
Enter secondary DNS server:
Select "No" to "Do you want to configure SNMP Network Management?"
Confirm the settings just configured, via selecting "Yes"
The system will then restart.
After the reboot has completed, the system should have the IP address configured.
This is a port so that I remember where to find the scripts.. https://github.com/mozziemozz/M365CallFlowVisualizer Shout out to the author: ...
Set the LineURI for a user using calling plans (Telstra Calling) 1. Need the location ID Get-CsOnlineLisLocation 2. Set-CsOlineVoice...
Using the Office 365 IP Address and URL Web service to pull the latest information. The website above has all the listed parameters that...
Quick note to provide a link to a "old" ShoreTel document that provides details of how to SSH to a ST Voice Switch. Edit: How To ...